“Old School Style” GAS CAN SPOUT & PARTS KIT MIDWEST SCEPTER IGLOO EAGLE MOELLER
“Made in USA”
Brand New, Never Used, only Scepter Cap in Retail Package
**Gas Can Not Included**
-1 Aftermarket Midwest Gas Spout including Gasket. These are Very High Quality Fuel / Gas / Diesel / Kerosene / Water “SPOUT & PARTS KIT”. If only using the Spout & Stopper alone, these May fit of some other Brand Plastic Gas Cans using your own existing screw cap collar for Gott, Rubbermaid Essence, Blitz, Eagle, Scepter, Igloo, Stancan, Rotopax and Kolpin. (These do not work with Chilton / Sears Craftsman Wedco / Briggs & Stratton cans).
-1 Aftermarket Gott Stopper Cap. These Stopper Caps double as a Spout Cap and as a Stopper for this kit only when hiding the spout inside the can for storage or transport. The Gasket on the end of the spout is the seal between the Collar, Stopper and Can, so be sure your Spout Gaskets are in good condition.
-1 Genuine Midwest Can Co Screw Cap Collar OEM. These screw cap retaining rings hold the spout to the can.
-1 Black Vent Cap with RETAINING LIP to prevent from popping out of your can. Original “MADE IN THE USA” Tri-Sure Vents Brand New, Never Used, No Retail Packaging. 1 Pieces total Vent Cap. Use Air Breather Vents for Fuel, Diesel, Kerosene, Gas, Water or anything that you need a smoother faster flow. Easy to install, drill required. Start with an empty can, Drill 1/2″ hole at the back of your plastic can above the fill line, insert vent cap and pop it in gently with a rubber mallet. We suggest you drill a smaller hole to start with and work your way up to the 1/2″ drill bit. Be sure to drill a straight clean hole don’t swagger side to side with the bit so you won’t make a bigger hole than you need. The Vent cap needs to sit in tight to give a good seal. Be sure to clean out your can prior to usage. Helpful Hints Installation Card included with every order!
-1 Authentic Scepter Closed Screw Cap with Gasket & Tether Strap to prevent loss. Easy to install just take tether strap & loop around handle, then push tether until it snaps into the top of cap. Screw to tighten on your plastic fuel can. Never lose another cap again! Excellent Blind Cap for storage and transportation. IMPORTANT: SPECIFICALLY DESIGNED FOR USAGE WITH SCEPTER SPOUT MODEL FS910V (SOLD SEPARATELY) SO BE AWARE IT MAY NOT THREAD PROPERLY WITH YOUR SPECIFIC SPOUT STORED IN THE CAN. The cap threads onto some, but not all models (please inquire) – Scepter, Ameri-Can, Midwest and Eagle Plastic jugs PG & KP Series.
★ IMPORTANT: PLEASE DOUBLE CHECK MEASUREMENTS AND COMPARE TO YOUR EXISTING PARTS. Not all Gas Can Parts are Interchangeable between Brands. These Parts do not fit any other Brand cans other than what is stated above. These Replacement Spouts & Parts are hard to find and considered obsolete due to New Government Regulations. Buy a few to keep on hand to Save your old gas can from the landfill ★
**Gas Can Not Included**
By making this purchase you are agreeing to the terms and conditions of our disclaimers.
Waiver, Disclaimers and Indemnity:
By purchasing this or any other product from Gas Spouts Plus LLC or their affiliates (collectively known as “Seller”), no matter which venue or location the sale is consummated, you (“Purchaser”) represent that you are of legal age (18 years or older), to use this item, enter into this agreement, and become bound by it’s terms. There are inherent risks involved in using any product, even while using protective equipment (which Purchaser is responsible to investigate and obtain), including but not limited to: serious physical injury, and possibly death. Purchaser waives all liability of Seller and claims against Seller for damages, losses, costs, injuries, penalties, expenses, attorney’s fees and liabilities of whatever nature whether in tort, contract, warranty or strict liability, including without limitation those resulting from injuries or deaths of persons and damages to property resulting from, or arising out of or in connection with the use of this item, loss or liability resulting from negligence, operational deficiencies or failures, acts of God, or other causes (whether such causes are avoidable or not) caused in whole or in part, directly or indirectly by Purchaser, Seller’s employees, representatives, agents or third parties (collectively, “specified claims”). Under no circumstances is Seller responsible for special, indirect, incidental or consequential damages, even if Purchaser has been advised of their possible existence. Purchaser agrees to indemnify, defend and hold Seller harmless from and against any and all specified claims.Seller hereby disclaims all claims, expressed and implied, with respect to this item, including without limitation, any implied warranties of merchantability, fitness for a particular purpose, or that the item is free from latent defects. Purchaser has had the opportunity to contact Seller to ask any questions regarding this item prior to purchase. Item is sold in its current (new) and “as is” condition as described under the description of this sale. Purchaser knowingly and freely assumes all risks of ownership and use, known and unknown. If Purchaser loans, re-sells, gifts, or transfers the item, Purchaser will obtain transferees agreement of all the terms contained herein. Should any legal cause of action arise, the Buyer agrees to defend Seller, and hold harmless and forever release the Seller, from any and all legal liability. Buyer also agrees to hold Seller harmless from any violations of any Federal, State and local regulations by purchase and or use of any of these products. Due to possible variations in gas cans (variety of reasons), Gas Spouts Plus LLC cannot insure a spill-proof fit.
PURCHASER WARRANTS THAT THEY HAVE READ, UNDERSTOOD, AND ACKNOWLEDGE THAT THEY HAVE GIVEN UP SUBSTANTIAL RIGHTS BY THIS AGREEMENT, AND AGREE TO THESE TERMS FREELY AND VOLUNTARILY WITHOUT ANY INDUCEMENT.